Fantasia model F7500E

I picked this up a couple months back and wanted to get it cleaned and oiled so I could start using it as my everyday machine, the few times I really do use or need a sewing machine.

New Home 6000 - the final chapter... maybe

Things aren't looking too promising for this old girl. The feed dog stepper motor drive circuit seems to be flaky. Getting to this point though was a bit of a chore. First I was thinking the stepper motor itself was cutting out, so out comes the stepper motor:

New Home 6000 - Cleaning, oiling, adjusting

Part two of the continuing saga of the Binford 6000, a.k.a. New Home Memory Craft 6000. This first photo is of the handwheel side of the machine with the cover removed. A cogged belt goes from the motor to the handwheel and a second cogged belt goes from the handwheel to the bottom shaft.

New Home (Janome) Memory Craft 6000

The title sounds like one of the old Home Improvement shows where Tim the Toolman Taylor would advertise some new Binford tool.

Tim: "Hey Al, what do you suppose we could use for that new awning we need to make?"

Al: "Not sure, Tim. What did you have in mind?"

Tim: "Let's see if this New Nome Memory Craft Binford 6000 sewing machine will do the trick."

Ok, so it's a little lame. I guess that's why I'm not in Hollywood writing for these guys...

So, here we are, my lovely bride and I taking a nice drive out of the area a few days back. I'm telling her that because of the horrendous pile of sewing machines needing attention in the basement, I'm thinking I shouldn't frequent any Goodwills or thrift stores until I whittle down the inventory. She says "let's just go to this one store we haven't been to before". Ok, hon. So we stop in at the Goodwill store in South Tacoma and what do I see but a New Home Memory Craft 6000 sewing machine. I didn't know what it was at the time. I just saw another newer machine. I did notice though that it had a pink 1/2-off price tag, lowering the price to a manageable $10.

Since I could tell it was electronic to some degree, I plugged it in and tried a few rudimentary functions just to make sure I wasn't buying an ugly door stop. It did seem to work. Fast forward a few days to today. The machine looks pretty decent, so I thought I'd try some stitches. Straight stitch works. Zig zag works. On to some fancy stitches that require the feed dogs to go both forward and reverse. Nope - didn't work. I decided to pop a few covers off and see what there was to see...... The innards of this puppy haven't seen the light of day for a while, and this next photo is it's good side. I didn't get shots of the wads of lint removed from the back side.

I again tried some fancy stitches but to no avail, so I poked around inside the machine, trying to reseat every connector that I could find. And let me tell you, there were plenty.

I again tried some fancy stitches and lo, it seemed to be working, at least for now. Ok, now to try my hand at programming something. Here's what I came up with (yes, it does letters - 135 or so different stitches in all):

Hey, look, it works. And even better, I can program it to some degree. I don't have a manual for this thing but I can get by for now. Below are some more shots of interesting features of this machine. The first couple show some LEDs on the bottom that indicate something. LED 1 appears to be lit whenever the machine has been plugged in. It still glows after unplugging the machine, so it must be connected to some big capacitor inside. LED 2 comes on when the machine is on. LED 4 blinks momentarily when the power switch is flipped off. I haven't seen LED 3 come on.

Here is a shot of LEDs 1 & 2 on:

DANGER WILL ROBINSON!!!! (see below) - I'd better not even think of taking this cover off... But a label like that will only make me want to take the cover off even more.

I'm sure I'll report more on this sewing machine at some point but that's all for now.

Yet Another Garage Sale (YAGS) - 5 machines (3 Singers, a New Home and a Universal)

At work I live in the world of acronyms (civil service - Navy), so it's no surprise I attempt to do the same when at home. Thus the title of today's post. YAGS.

Some garage sales are good, and some are really good, while others are in the category of why-did-I-waste-precious-brake-material-stopping-for-this. Well, today's garage sale had five vintage machines. The lady had a lawn full of stuff but my eye immediately spotted the row of sewing machines on the grass even before I got the car parked. Apparently the garage sale had been going on for two weekends and this was the second day of the second weekend, so I'm presuming they were wanting to unload stuff. And I was right. While the sewing machines were not a screaming deal (which would have been on the order of a buck apiece), I did walk away with five machines for $25. Not bad for 100+ pounds of cast iron, steel and a bit of plastic. I didn't take a very good look at the machines prior to settling on a price but figured I couldn't go wrong. Now on to the down and dirty, emphasis on dirty.

If I had to choose the best machine of the five, it would probably have to be the Singer 66-4. Once I got it home, I noticed the very nice decals on it. I believe they're called Red Eye. The one downside to this machine is it is only forward stitching - no reverse. See the small knob beneath the bobbin winder? Thread that puppy all the way in and you have a long forward stitch. Thread it out all the way and the stitch length is 0, or nearly so. Sounds so convenient, doesn't it, but I guess back in the good ol' days, you didn't mess with stitch length much (as in the old commercial - just set it and forget it), especially when you didn't need to be bothered with such things as reverse. The machine does have the cool spoked handwheel and vintage layer of dust though.

The next best machine in the group is the Domestic Admiral, a Class 15 clone with the upper thread tension knob poking out the left side of the end cover. I never could understand the logic behind Singer putting the take-up lever and tension knob on the end cover of their Class 15 machines. Sewing machines are easier to thread with those items on the front of the machine.

Third in line would be the New Home model NLB. The friction drive disk has a massive divot in it from being pressed on the handwheel for the last who knows how many decades, but it can probably be saved.

The final two machines are Singers, an early 60s model 417 missing the needle plate and spool post, and an early 70s model 603E missing parts of the stitch length lever mechanism. The 603E did come with a cam under the hood, I guess to make up for the missing parts...

So there you have it. A good find at a local garage sale.

Pfaff 130 Automatic 50010 attachment installation instructions

If you are ever in need of instructions for installing one of Pfaff's Automatic 50010 attachments (the cool whizbang gizmo hanging off the back of the Pfaff 130 in the first photo below), the following link will take you to a folder with photos of all pages in the manual:

Pfaff 50010 Automatic installation manual

Excitement for the week - tire blowout

Not sewing machine related, but we were on a camping trip with our pickup truck and camper the last several days. Coming home on the final 100 miles of our 1200 mile trip we had a blowout on the left rear. A loud motorcycle was just passing us on the left and we heard a very loud *bang*. We figured it was the m/c but all of a sudden our truck started swaying. My son was driving and he got the truck pulled to the side without incident. Here's the damage:

Five... no, six sewing machines followed me home...

Five sewing machines today and one yesterday. Ok, so maybe I coaxed them along a little. They didn't actually end up at my house of their own free wills, ringing the door bell and wanting a warm place to stay. And three of them were free (parts machines). It is difficult to turn down a free sewing machine, no matter what it looks like. So without further ado, here they are. The photos show them in as-received condition.

Pfaff 130-6 (in gen-u-ine Pfaff carrying case with busted handle)

Work and play

I've been on travel for work quite a bit lately so I haven't had much opportunity to do things sewing-machine-related. Three weeks in Japan, three weeks at home, two weeks in Japan, two weeks home, then two weeks in Guam (the Guam trip I was able to take my wife along). Soooo, I'm really itching to get back to sewing machine related fun. To get things kicked off, my dear wife and I hit two Goodwill stores today, which happens to be the day we returned from Guam (24 hour travel time from start to finish). Our heads are kind of spinning from the three flights but I can always (usually) make time to hit the thrift stores. I purchased a Singer 328K in really nice cosmetic condition (photos will come at a later date) and an older Singer buttonholer, plus two boxes of Kenmore cams.

The reason for today's blog entry though is to show the machine I passed up at Goodwill, although I may have to finagle my wife into picking it up on the $1.29 Monday event in a couple weeks.

The machine pictured below is a Singer 15-91. Sorry for the lousy photo. You can't really tell if you didn't know, but the machine is mounted to a board with six screws. Someone drilled six holes through the machine bed (!) around the perimeter and put wood screws through the bed and into the wood (you can kind of make out a brass screw head in the lower right of the bed). A couple other minor issues I saw are that the spool post is a piece of threaded rod and the stitch length knob is a regular off -the-shelf screw. Oh, and there was no motor controller. All these things add up to a not-so-ideal purchase.

Domestic Model 69 Hi-Speed

Now there's a term you don't normally associate with an almost 100-year-old sewing machine - "Hi-Speed". But alas, there it is, in bold letters on the front of the sewing machine. I'm getting ahead of myself though. First, let me show the nifty case this brown beauty came in.

Fantasia

Collecting sewing machines is a satisfying hobby in that machines (almost mysteriously) show up in my basement that I hadn't previously run across. There seems to be a never-ending supply of unique sewing machines. Granted, they all pretty much look the same, but they are all different also. Kind of like the saying, "I'm unique, just like everyone else." Ok, so sewing machines aren't as unique as humans, but I still like them. Sewing machines, that is.

Now that we have the preamble out of the way, on to the photos. Here is one of my latest acquisitions, a Fantasia. I don't know much about it other than when I plugged it in at the store it ran, although somewhat slow.

Garage sales - feast or famine

I've stopped trying to figure out why on some days every garage sale we hit has nothing but on other days each one we stop at has something interesting. A week ago we hit a couple sales and I came home with three new additions. They're really nothing to write home about but they are cheap entertainment.

The first garage sale had a Kenmore 158.17520 in a cabinet but missing the cord plug (?), and a Singer 920 Futura II with some attachments and cams but no motor controller. The second sale had a bare Singer 500A (missing the motor controller, spool pins, cam spring, side door, and who knows what else).

Old Kenmore machines are a pretty safe investment, especially when they are five bucks. They are well-built and will last a millennium. Not much in the looks department though. I'm not sure why someone cut off the cord plug off, so I don't know if it runs, but it would take a lot to put a Kenmore out of commission.

Singer Stylist 543

Does this poor neglected sewing machine look lonely? I thought it did.

I picked this machine up on Sunday afternoon, which means the poor thing had been sitting on the shelf for almost 4 entire days during the 50% off green-tag sale at Goodwill. I just couldn't resist. And it came with the manual. I couldn't ask for more. Well, ok, it would have been nice to have a box of accessories hidden away somewhere.

Read's Sailmaker

Here's one I haven't heard of. That's not saying a whole lot, because I haven't been dinking around with sewing machines for a very long period of time.

So I'm at the local Goodwill and spot the lone sewing machine case on the shelf. Looks like any other generic case I've seen hundreds of times before.

Hefting the case off the shelf (upwards of 40 pounds) tells me there is a generic cast iron sewing machine housed within. Upon popping the lid off, I see a generic Japanese zig zag machine. Hmm, "Read's" it says on the label. Not one I've heard before and kind of a strange name for a sewing machine.

Strange disc. What Is It?

I saw this disk (pictured below) in the local Goodwill. I knew I wanted it but I had no idea what it was, other than it had stitch patterns depicted around the outer edges. Now if anyone has been to Goodwill, they know that when they find that cool little item, they should know to look around the general area for any other parts that may go with said "cool item". Well, after a fairly thorough search of the area, I didn't find anything that remotely looked like it went with this disk.

Problem number 1, what kind of machine did this go to? Not really a problem I guess, I still wanted it.

Problem number 2, the silly thing didn't have a price tag. I just threw caution to the wind and went to the cashier. She punched something in to her machine. She could see that I was wondering what I was being charged so she said, "Are you happy with 69 cents?" Yup.