This tractor came with parts of a crude hitch. It kind of appears to be a 3 point setup but parts are missing so I don't know what is actually from Allis Chalmers. This first photo is of the finished project.
Saturday, October 17, 2026
Monday, October 12, 2026
1940 John Deere AR - Straightening Rear Fenders and New Hitch
The rear fenders on this tractor are big. And being so big, any little bit they are out of kilter really shows up. The right fender is the worst and tilts inward quite a bit, but the left fender was also tilted in just a bit. This first photo shows the right fender pretty dramatically.
Wednesday, October 7, 2026
1941 John Deere HN Carburetor Float Sprung a Leak... and Fixing Yet Another Coolant Leak
There is never a dull moment when you have a small collection of 70-90 year old tractors. When driving the HN this morning, it was acting up. At one point gas made its way into a combustion chamber and hydro-locked the engine when I tried to start it. I pulled the spark plugs and gas came gushing out one spark plug hole. Great, the carburetor float needle must be stuck. I removed the float bowl with the carb still on the tractor, and I wiggled the float around while gas was flushing through the needle and seat, in hopes any debris would make its way out. I put the float bowl back on but that didn't fix the problem. Time to remove the carb. Once on the bench and apart, I shook the float like I always do, just to make sure it hadn't collected any gas. Wouldn't you know, there was gas in it. So it was time to clean up the soldered seam and do a little repair work. These first two photos show the float. The first one shows it dry and the second one shows a small wet spot where the leak is.
Monday, October 5, 2026
2024 Miva VA08 "Micro" Mini Excavator - New Acquisition is Broken - No Hydraulics
This is probably a frivolous purchase but I've wanted to try one of these mini excavators for several years now. This particular one was being sold by a church friend so all the better to help him out and also get something I've wanted. I didn't know he was selling it until I ran across it on Facebook Marketplace. The friend purchased the excavator a year or so ago and was using it at his place when all of a sudden there were no hydraulics to speak of. He said there is probably 4 hours' worth of use on the machine. He bought and installed a new pressure relief valve and hydraulic pump, but neither of those solved the problem. He decided to put it up for sale because he was done trying to fix it. Here's a photo from the ad.



