For those that, when they hear the numbers 401 - 403 - 404 and don't have a clue to what those numbers mean, I'll clue you in. What I'm referring to is when Singer was producing what many think are the quintessential sewing machine family, the Singer slant-needle 400-series.
The model 401 was the top of the line Singer in the late 50s. It could do it all, and it could do it without having to pull one cam and insert another. Scads of stitch options (not sure how many but somewhere between 10 and 100) were available merely by turning a couple knobs on the front of the machine. And it could take cams as well. The 403 was the lower-priced variant that only took cams, no built-in stitches were to be had. The 404 was the straight-stitch variant that was for those looking for no frills, or possibly for use in school home-ec classes.
I have no clue how Singer managed to come up with the numbering scheme they used for sewing machines back then. When I'd mentioned 401, 403 & 404 to my wife and daughter, they immediately asked, "What, no 402?" All I could say was, I have no clue why. And Singer made things more convoluted when they introduced the 500-series. There's a 500 (successor to the 401) and a 503 (successor to the 403). Ok, so the 403 and 503 make sense, but where's the 501, 502 and 504? I just don't know.
Well, now that the (very lengthy) preamble is out of the way, here's the subject of today's blog:
The machine pictured above is the illustrious Singer 403A, the "cam-only" version of the 400-family. I had picked up a 401 some years back and not too long ago I found a 404, so this 403 rounds out the 400-series collection.
It came in a portable Singer case that has seen better days, but I think is salvageable with a fair bit of elbow grease, some warm soap and water, and maybe a little glue.
And it even came with a bunch of attachments and 9 cams.
No comments:
Post a Comment